LTM4600HV Datasheet | Linear Technology

LTM4600HV 10A, 28VIN High Efficiency DC/DC µModule Features n plete Switch Mode Power Supply n Wide Input Voltage Range: 4.5V to 28V n 10A DC, 12A Peak Output Current n Parallel Two µModule™ DC/DC Converters for 20A Output Current n 0.6V to 5V Output Voltage n 1.5% Output Voltage Regulation n Ultrafast Transient Response n Current Mode Control n - 55°C to 125°C Operating Temperature Range (LTM4600HVMPV) n Ro HS pliant Package with Gold Pad Finish (e4) n Up to 92% Efficiency n Programmable Soft-Start n Output Overvoltage Protection n Optional Short-Circuit Shutdown Timer n Small Footprint, Low Profile (15mm × 15mm × 2.82mm) LGA Package Applications n Tele and Networking Equipment n Military and Avionics Systems n Industrial Equipment n Point of Load Regulation n Servers Description The LTM®4600HV is a plete 10A, DC/DC step down power supply with up to 28V input operation. Included in the package are the switching controller, power FETs, inductor, and all support ponents. Operating over an input voltage range of 4.5V to 28V, the LTM4600HV supports an output voltage range of 0.6V to 5V, set by a single resistor. This high efficiency design delivers 10A continuous current (12A peak), needing no heat sinks or airflow to meet power specifications. Only bulk input and output capacitors are needed to finish the design. The low profile package (2.82mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and an adaptive on-time current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. Fault protection Features include integrated overvoltage and short circuit protection with a defeatable shutdown timer. A built-in soft-start timer is adjustable with a small capacitor. The LTM4600HV is packaged in a pact (15mm × 15mm) and low profile (2.82mm) over-molded Land Grid Array (LGA) package suitable for...