LTM4616 Datasheet | Linear Technology

.. Features - - - LTM4616 Dual 8A per Channel Low VIN DC/DC µModule DESCRIPTION The LTM®4616 is a plete dual 2-phase 8A per channel switch mode DC/DC power regulator system in a 15mm × 15mm surface mount LGA package. Included in the package are the switching controller, power FETs, inductor and all support ponents. Operating from an input voltage range of 2.7V to 5.5V, the LTM4616 supports two outputs within a voltage range of 0.6V to 5V, each set by a single external resistor. This high efficiency design delivers up to 8A continuous current (10A peak) for each output. Only bulk input and output capacitors are needed, depending on ripple requirement. The part can also be configured for a 2-phase single output at up to 16A. The low profile package (2.82mm) enables utilization of unused space on the back side of PC boards for high density point-of-load regulation. Fault protection Features include overvoltage protection, overcurrent protection and thermal shutdown. The power module is offered in a space saving and thermally enhanced 15mm × 15mm × 2.82mm LGA package. The LTM4616 is Pb-free and Ro HS pliant. Different binations of Input and Output Number of Inputs 2 2 1 1 Number of Outputs 2 1 2 1 IOUT (MAX) 8A, 8A 16A 8A, 8A 16A - - - - - - - - - - - - plete Dual DC/DC Regulator System Input Voltage Range: 2.7V to 5.5V Dual 8A Outputs, or Single 16A Output with a 0.6V to 5V Range Output Voltage Tracking and Margining ±1.75% Total DC Output Error (- 40°C to 125°C) Current Mode Control/Fast Transient Response Power-Good Tracking and Margining Overcurrent/Thermal Shutdown Protection Onboard Frequency Synchronization Spread Spectrum Frequency Modulation Multiphase Operation Selectable Burst Mode® Operation Output Overvoltage Protection Gold-Pad Finish Allows Soldering with Pb and Pb Free Solder Paste Small Surface Mount Footprint, Low Profile (15mm × 15mm × 2.82mm) LGA Package APPLICATIONS - - - Tele, Networking and Industrial Equipment...