LTM8026 Datasheet | Linear Technology

LTM8026 36VIN, 5A CVCC Step-Down µModule Regulator Features DESCRIPTION n plete Step-Down Switch Mode Power Supply n Constant-Voltage Constant-Current Operation n Selectable Output Current Up to 5A n Parallelable for Increased Output Current, Even from Different Voltage Sources n Wide Input Voltage Range: 6V to 36V n1.2V to 24V Output Voltage n Selectable Switching Frequency: 100k Hz to 1MHz n Sn Pb or Ro HS pliant Finish n Programmable Soft-Start n(11.25mm × 15mm × 2.82mm) LGA and (11.25mm × 15mm × 3.42mm BGA Packages APPLICATIONS n Super Cap Charging n General Purpose Industrial n Extreme Short-Circuit Protection or Accurate Output Current Limit nµController-Based Battery Charging n High Power LED Drive n Multiple Input, Single Output Voltage Conversion The LTM®8026 is a 36VIN, 5A constant-voltage, constantcurrent (CVCC) step-down µModule® regulator. Included in the package are the switching controller, power switches, inductor and support ponents. Operating over an input voltage range of 6V to 36V, the LTM8026 supports an output voltage range of 1.2V to 24V. CVCC operation allows the LTM8026 to accurately regulate its output current up to 5A over the entire output range. The output current can be set by a control voltage, a single resistor or a thermistor. Only resistors to set the output voltage and frequency and the bulk input and output filter capacitors are needed to finish the design. The LTM8026 is packaged in a thermally-enhanced, pact (11.25mm × 15mm) overmolded land grid array (LGA) and ball grid array (BGA) packages suitable for automated assembly by standard surface mount equipment. The LTM8026 is available in Sn Pb (BGA) or Ro HS pliant terminal finish. L, LT, LTC, LTM, µModule, Linear Technology and the Linear logo are registered trademarks of Analog Devices Inc. All other trademarks are the property of their respective owners. Protected by U.S. Patents including 7199560, 7321203 and others pending. TYPICAL...