LTM8048 Datasheet | Linear Technology

LTM8048 3.1VIN to 32VIN Isolated µModule DC/DC Converter with LDO Post Regulator Features n plete Switch Mode Power Supply n 725VDC Isolation n Wide Input Voltage Range: 3.1V to 32V n VOUT1 Output: Up to 440m A (VOUT1 = 2.5V, 24VIN) 2.5V to 13V Output Range n VOUT2 Low Noise Linear Post Regulator: Up to 300m A 1.2V to 12V Output Range n Current Mode Control n Programmable Soft-Start n User Configurable Undervoltage Lockout n Sn Pb or Ro HS pliant Finish n Low Profile (11.25mm × 9mm × 4.92mm) Surface Mount BGA Package APPLICATIONS n Industrial Sensors n Industrial Switches n Ground Loop Mitigation DESCRIPTION The LTM®8048 is an isolated flyback µModule DC/DC converter with LDO post regulator. The LTM8048 has an isolation rating of 725VDC. Included in the package are the switching controller, power switches, transformer, and all support ponents. Operating over an input voltage range of 3.1V to 32V, the LTM8048 supports an output voltage range of 2.5V to 13V, set by a single resistor. There is also a linear post regulator whose output voltage is adjustable from 1.2V to 12V as set by a single resistor. Only output, input, and bypass capacitors are needed to finish the design. Other ponents may be used to control the soft-start control and biasing. The LTM8048 is packaged in a thermally enhanced, pact (11.25mm × 9mm × 4.92mm) over-molded ball grid array (BGA) package suitable for automated assembly by standard surface mount equipment. The LTM8048 is available with Sn Pb (BGA) or Ro HS pliant terminal finish. L, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. TYPICAL APPLICATION 725V DC Isolated Low Noise µModule Regulator VIN 3.1V TO 29V 2.2µF 4.7µF 6.19k VIN RUN BIAS VOUT1 VOUT2 ADJ1 ADJ2 SS GND VOUT- 725VDC ISOLATION 5.7V 22µF 162k 10µF VOUT2 5V 8048 TA01 ISOLATION...