LTP5901-WHM Datasheet | Linear Technology

LTP5901-WHM/LTP5902-WHM Smart Mesh Wireless HART Node Wireless Mote Module Network Features plete Radio Transceiver, Embedded Processor, and Networking Software for Forming a Self-Healing Mesh Network n pliant to Wireless HART (IEC62591) Standard n Smart Mesh® Networks Incorporate: n Time synchronized Network-Wide Scheduling n Per Transmission Frequency Hopping n Redundant Spatially Diverse Topologies n Network-Wide Reliability and Power Optimization n NIST Certified Security n Smart Mesh Networks Deliver: n >99.999% Network Reliability Achieved in the Most Challenging Dynamic RF Environments Often Found in Industrial Applications n Sub 50µA Routing Nodes n Description Smart Mesh Wireless HART wireless sensor networks are self managing, low power networks built from wireless nodes called motes. The LTP™5901-WHM/LTP5902-WHM is the Wireless HART mote product in the Eterna®- family of IEEE 802.15.4 printed circuit board assembly solutions, featuring a highly-integrated, low power radio design by Dust Networks® as well as an ARM Cortex-M3 32-bit microprocessor running Dust’s embedded Smart Mesh Wireless HART networking software. Both the LTP5901WHM (with chip antenna), at 24mm × 42mm, and the LTP5902-WHM (with MMCX connector), at 24mm × 37mm, are designed for surface mount assembly. With Dust’s time-synchronized Wireless HART networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. The Smart Mesh Wireless HART software provided with the LTP5901/2-WHM is fully tested and validated, and is readily configured via a software Application Programming Interface (API). Smart Mesh Wireless HART motes deliver a highly flexible network with proven reliability and low power performance in an easy-to-integrate platform. L, LT, LTC, LTM, Eterna, Smart Mesh, Linear Technology, the Linear logo, Dust and Dust Networks are registered trademarks and LTP and the Dust Networks logo are trademarks of Linear...