LTP5902-IPM Datasheet | Linear Technology

LTP5901-IPM/LTP5902-IPM Smart Mesh IP Node 2.4GHz 802.15.4e Wireless Mote Module Network Features n plete Radio Transceiver, Embedded Processor, and Networking Software for Forming a Self-Healing Mesh Network n Smart Mesh® Networks Incorporate: n Time Synchronized Network-Wide Scheduling n Per Transmission Frequency Hopping n Redundant Spatially Diverse Topologies n Network-Wide Reliability and Power Optimization n NIST Certified Security n Smart Mesh Networks Deliver: n >99.999% Network Reliability Achieved in the Most Challenging RF Environments n Sub 50µA Routing Nodes n pliant to 6Lo WPAN Internet Protocol (IP) and IEEE 802.15.4e Standards LTP5901-IPM/LTP5902-IPM Features n Industry-Leading Low Power Radio Technology with 4.5m A to Receive and 9.7m A to Transmit at 8d Bm n RF Modular Certification Include USA, Canada, EU, Japan, Taiwan, Korea, India, Australia and New Zealand n PCB Assembly with Chip Antenna (LTP5901-IPM) or with MMCX Antenna Connector (LTP5902-IPM). QFN Version (LTC®5800-IPM) Available n Micrium µCOS-II Real Time Operating System Based On-Chip Software Development Kit Description Smart Mesh IP™ wireless sensor networks are self managing, low power Internet Protocol (IP) networks built from wireless nodes called motes. The LTP™5901-IPM/ LTP5902-IPM is the IP mote product in the Eterna®- family of IEEE 802.15.4e printed circuit board assembly solutions, featuring a highly-integrated, low power radio design by Dust Networks® as well as an ARM Cortex-M3 32-bit microprocessor running Dust’s embedded Smart Mesh IP networking software. Both the LTP5901-IPM (with chip antenna), at 24mm × 42mm, and the LTP5902-IPM (with MMCX connector), at 24mm × 37mm, are designed for surface mount assembly. With Dust’s time-synchronized Smart Mesh IP networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. The Smart Mesh IP software provided with the LTP5901-IPM/LTP5902-IPM is fully tested and...