LT3092 Datasheet | Linear Technology

200m A 2-Terminal Programmable Current Source Features n Programmable 2-Terminal Current Source n Maximum Output Current: 200m A n Wide Input Voltage Range: 1.2V to 40V n Input/Output Capacitors Not Required n Resistor Ratio Sets Output Current n Initial Set Pin Current Accuracy: 1% n Reverse-Voltage Protection n Reverse-Current Protection n <0.001%/V Line Regulation Typical n Current Limit and Thermal Shutdown Protection n Available in 8-Lead SOT-23, 3-Lead SOT-223 and 8-Lead 3mm × 3mm DFN Packages n AEC-Q100 Qualified for Automotive Applications APPLICATIONS n 2-Terminal Floating Current Source n GND Referred Current Source n Variable Current Source n In-Line Limiter n Intrinsic Safety Circuits DESCRIPTION The LT®3092 is a programmable 2-terminal current source. It requires only two resistors to set an output current between 0.5m A and 200m A. A multitude of analog techniques lend themselves to actively programming the output current. The LT3092 is stable without input and output capacitors, offering high DC and AC impedance. This feature allows operation in intrinsically safe applications. The SET pin Features 1% initial accuracy and low temperature coefficient. Current regulation is better than 10ppm/V from 1.5V to 40V. The LT3092 can operate in a 2-terminal current source configuration in series with signal lines. It is ideal for driving sensors, remote supplies, and as a precision current limiter for local supplies. Internal protection circuitry includes reverse-battery and reverse-current protection, current limiting and thermal limiting. The LT3092 is offered in the 8-lead TSOT-23, 3-lead SOT-223 and 8-lead 3mm × 3mm DFN packages. All registered trademarks and trademarks are the property of their respective owners. TYPICAL APPLICATION Adjustable 2-Terminal Current Source - VOUT = 1.2V TO 40V 10µA + - SET RSET ROUT ISOURCE = 10µA - RSET ROUT 3092 TA01a SET PIN CURRENT (µA) SET Pin Current vs...