LTC3765 Datasheet | Linear Technology

.Data Sheet.co.kr LTC3765 Active Clamp Forward Controller and Gate Driver Features n n n n n DESCRIPTION The LTC®3765 is a start-up controller and gate driver for use in a self-starting secondary-side control forward converter. When bined with the LTC3766 secondaryside synchronous forward controller, a plete isolated power supply is created using a minimum of discrete parts. A proprietary scheme is used to multiplex gate drive signals and bias power across the isolation barrier through a small pulse transformer. The LTC3765 contains an on-chip bridge rectifier that extracts gate drive bias power from this pulse transformer, eliminating the need for a separate bias supply. A precision undervoltage lockout circuit and linear regulator controller ensure a quick and well-controlled start-up. The LTC3765 includes an active clamp output for driving an external PMOS, as well as an adjustable delay to optimize efficiency. The active clamp architecture reduces voltage stress on the main power switch, and provides the highest possible efficiency. Overcurrent protection and the Direct Flux Limit guarantee no transformer saturation without promising transient response. L, LT, LTC, LTM, Poly Phase, Linear Technology and the Linear logo are registered trademarks and Direct Flux Limit, Thin SOT and No RSENSE are trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. Protected by U.S. Patents, including 7200014 and 6144194. Other patents pending. n n n n n n n Supports Self-Starting Secondary-Side Control Direct Flux Limit™ Guarantees No Saturation Active Clamp Drive with Delay Adjustment On-Chip Bridge Rectifier Eliminates Need for Separate Gate Drive Bias Supply Wide Input Supply Range: 8V and Up (Limited Only by External ponents) Linear Regulator Controller for Fast Start-Up High Speed Gate Drivers Precision UVLO with Adjustable Hysteresis Overcurrent Protection Overtemperature Protection...