LTM4627 Datasheet | Linear Technology

Features n plete 15A Switch Mode Power Supply n Wide Input Voltage Range: 4.5V to 20V n 0.6V to 5V Output Range n ±1.5% Total DC Output Error n Differential Remote Sense Amplifier for Precision Regulation n Current Mode Control/ Fast Transient Response n Frequency Synchronization n Parallel Current Sharing (Up to 60A) n Selectable Pulse-Skipping or Burst Mode® Operation n Soft-Start/Voltage Tracking n Up to 93% Efficiency (12VIN, 3.3VOUT) n Overcurrent Foldback Protection n Output Overvoltage Protection n Small Surface Mount Footprint, Low Profile 15mm × 15mm × 4.32mm LGA and 15mm × 15mm × 4.92mm BGA Packages APPLICATIONS n Tele Servers and Networking Equipment n ATCA and Storage Cards n Industrial Equipment n Medical Systems LTM4627 15A DC/DC µModule Regulator DESCRIPTION The LTM®4627 is a plete 15A output high efficiency switch mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor and pensation ponents. Operating over an input voltage range from 4.5V to 20V, the LTM4627 supports an output voltage range of 0.6V to 5V, set by a single external resistor. Only a few input and output capacitors are needed. Current mode operation allows precision current sharing of up to four LTM4627 regulators to obtain 60A output. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability. The device supports frequency synchronization, multiphase/current sharing operation, Burst Mode operation and output voltage tracking for supply rail sequencing. The LTM4627 is offered in thermally enhanced 15mm × 15mm × 4.32mm LGA and 15mm × 15mm × 4.92mm BGA packages. The LTM4627 is available with Sn Pb (BGA) or Ro HS pliant terminal finish. L, LT, LTC, LTM, Linear Technology, the Linear logo, Burst Mode, µModule and Poly Phase are registered trademarks and LTpower CAD is a trademark of Linear Technology Corporation. All other...