• Part: 20KP17A
  • Manufacturer: Liown
  • Size: 1.31 MB
Download 20KP17A Datasheet PDF
20KP17A datasheet preview
20KP17A page 2
Page 2
20KP17A page 3
Page 3

20KP17A Key Features

  • 20000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
  • Glass passivated chip junction in P600 package
  • Fast response time:typically less than 1.0ps from 0 Volts to VB min
  • Excellent clamping capability
  • Typical failure mode is a short
  • Whisker test is conducted
  • ESD protection of data lines in accordance with IEC 61000-4-2, 30kV(Air), 30kV (Contact)
  • EFT protection of data lines in accordance with IEC 61000-4-4
  • Low incremental surge resistance
  • Typical IR less than 2μA when VR >40V

Other 20KP17A Datasheets

Manufacturer Part Number Description
MDE Semiconductor
MDE Semiconductor		 20KP172A GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
WON-TOP Logo Won-Top Electronics 20KP172A 20000W TRANSIENT VOLTAGE SUPPRESSOR
UN Semiconductor
UN Semiconductor		 20KP172A Axial Lead Transient Voltage Suppressors
EIC Logo EIC Semiconductor 20KP172A TRANSIENT VOLTAGE SUPPRESSORS
WON-TOP Logo Won-Top Electronics 20KP172CA 20000W TRANSIENT VOLTAGE SUPPRESSOR

20KP17A Description

The 20KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Non-repetitive current pulse , per Fig.3 and derated above TJ (initial) =25℃ per Fig.2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.