SMB200CA Datasheet | LITEON

FEATURES Rating to 200V VBR For surface mounted applications Reliable low cost construction utilizing molded plastic technique Plastic material has UL flammability classification 94V-O Typical IR less than 1u A above 10V Fast response time: typically less than 1.0ps for Uni-direction,less than 5.0ns for Bi-direction,form 0 Volts to BV min SMB A DIM. A B B C C D E G F F E D G H MIN. 4.06 3.30 1.96 0.15 5.21 0.05 2.01 0.76 MAX. 4.57 3.94 2.21 0.31 5.59 0.20 2.62 1.52 MECHANICAL DATA Case : Molded plastic Polarity : by cathode band denotes uni-directional device none cathode band denotes bi-directional device Weight : 0.003 ounces, 0.093 gram All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% .. CHARACTERISTICS PEAK POWER DISSIPATION AT TA = 25 C, TP = 1ms (Note 1,2) Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (Note 3) (JEDEC METHOD) Steady State Power Dissipation at T L =75 C SYMBOLS VALUE UNIT Minimum 600 WATTS IFSM AMPS. PM(AV) WATTS Maximum Instantaneous forward voltage at 50A for unidirectional devices only (Note 3) SEE NOTE 4 Volts Operating Temperature Range -55 to +150 Storage Temperature Range TSTG -55 to +175 C REV. 1, 24-May-2000 NOTES : 1. Non-repetitive current pulse, per fig. 3 and derated above TA= 25 C per fig.1. 2. Thermal Resistance junction to Lead 3. 8.3ms single half-sine wave duty cycle= 4 pulses maximum per minute (unidirectional units only). 4. VF= 3.5V on SMB6.8 thru SMB90A devices and VF= 5.0V on SMB100 thru SMB200A devices. RATING AND CHARACTERISTIC CURVES SMB SERIES LITE ON PEAK FORWARD SURGE CURRENT, AMPERES FIG.1 - PULSE DERATING CURVE PEAK PULSE DERATING IN % OF PEAK POWER OR...