5.0SMDJ18CA Datasheet | Littelfuse

Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features & Benefits - 5000W peak pulse power - Typical IR less than 5μA when capability at 10/1000μs VBR min>22V waveform, repetition rate (duty - High temperature to reflow cycles):0.01% soldering guaranteed: - SMD low profile surface 260°C/40sec mount package minimizing PCB footprint - VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature - Typical failure mode is short Coefficient,) from over-specified voltage or - UL Recognized pound current meeting flammability rating V-0 - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - Meet MSL level1, per J-STD-020, LF maximun peak of 260°C - IEC 61000-4-2 ESD 30k V(Air), 30k V (Contact) - ESD protection of data lines in accordance with IEC 610004-2 - Built-in strain relief - Matte tin lead- free plated - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is - Glass passivated chip junction tin(Sn) (IPC/JEDEC J-STD- - Fast response time: typically 609A.01) less than 1.0ps from 0V to BV - Recognized to UL 497B as an min Isolated Loop Circuit Protector - Excellent clamping capability - Low incremental surge resistance Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Tele, puter, Industrial and Consumer electronic applications. Functional Diagram Cathode Bi-directional Uni-directional Anode © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised:...