5.0SMDJ48AS Datasheet | Littelfuse

The 5.0SMDJxx S series, single chip design is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - 5000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% - Recognized to UL 497B as an Isolated Loop Circuit Protector - DO214AB SMT package for minimized board space - Low profile package - Typical failure mode is short from over-specified voltage or current - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - ESD protection of data lines in accordance with IEC 61000-4-2, ESD 30k V (Air), 30k V (Contact) - EFT protection of data lines in accordance with IEC 61000-4-4 - Built-in strain relief - Glass passivated chip junction - Very fast response time - Excellent clamping capability - Low incremental surge resistance - Typical when VIRBRlemsisn>th1a2n V2μA - High temperature to reflow soldering guaranteed: 260°C/10sec - Vx(αBR(T1:@T+eαTm TJ=pxe V(r TBa RJt@u- r22e55°))C Coefficient) - UL Recognized pound meeting flammability rating V-0 - Meet MSL level1, per J-STD-020, LF maximun peak of 260°C - Matte tin lead- free plated - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications TVS ponents are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Tele, puter, Industrial and Consumer electronic applications. Cathode Uni-directional Anode...