5KP12CA Overview
Key Specifications
Package: Axial
Mount Type: Through Hole
Pins: 2
Operating Voltage: 12 V
Description
The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Bi-directional Agency Approvals Agency Agency File Number E230531 Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2)(Note 1) PPPM 5 kW Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC PD 8.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) IFSM 400 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 3) VF 3.5/5.0 V Operating Junction and Storage Temperature Range TJ, TSTG -55 to 175 °C Typical RθJL Typical 8.0 °C/W 40 °C/W Notes: 1.
Key Features
- 5 kW peak pulse capability
- Typical IR less than 2μA at 10/1000μs waveform, when VBR min>12V repetition rate (duty
- High temperature cycles):0.01% to reflow soldering
- Glass passivated chip guaranteed: 260°C/40sec junction in P600 package / 0.375”, (9.5mm) lead
- Fast response time: typically less than 1.0ps length, 5 lbs., (2.3kg) tension from 0 Volts to BV min
- Excellent clamping capability
- Typical failure mode is short from over-specified voltage or current
- Whisker test is conducted based on JEDEC JESD201A per its table 4a
- VBR @ TJ= VBR@25°C x (1+αT x (TJ
- 25)) (αT:Temperature Coefficient, typical value is 0.1%)
