AK10-530C-Y Datasheet | Littelfuse

AK10-Y Series TVS Diodes Axial Leaded - 10k A > AK10-Y series Ro HS Pb e4 Agency Recognitions Agency Agency File Number E128662 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Operating Storage Temperature Range Operating Junction Temperature Range Current Rating1 Note: 1. Rated IPP measured with 8/20μs pulse. Symbol TSTG TJ IPP Value -55 to 150 -55 to 125 Unit °C ºC k A Functional Diagram Bi-direcctional Description The AK10-Y series of high power TVS diode is specially designed for meeting severe surge test environment of both AC and DC line protection applications. It Features a very fast response and ultra low clamping characteristics as pared to MOVs (Metal Oxide Varistors). It acplishes this by virtue of the Littelfuse Foldback TM technology,which provides a clamping voltage lower than the avalanche voltage (but above the rated working voltage); therefore, any voltage rise due to increased current conduction is maintained at a minimum magnitude, providing the best possible protection level. These AK ponents can be connected in series and / or parallel to create a very high surge current protection solution. Features - Recognized to UL 497B as an Isolated Loop Circuit Protector - Both reflow and wave soldering capable - Very low clamping voltage - Ultra pact: less than one-tenth the size of traditional discrete solutions - Sharp breakdown voltage - Low slope resistance - Bi-directional - Foldback technology for superior clamping factor - Symmetric in leads width for easier soldering during assembly. - IEC-61000-4-2 ESD 15k V(Air), 8k V (Contact) - ESD protection of data lines in accordance with IEC...