Datasheet4U Logo Datasheet4U.com

CA10 - SURFACE MOUNT ESD SUPPRESSORS/ 8-Line CA10

General Description

C t - Cover tape thickness Dd - Drive hole diameter Ds - Drive hole spacing Pd - Pocket depth Ph - Pocket height Ps - Pocket spacing Pw - Pocket width Tt - Carrier tape thickness Tw - Carrier tape width Measurement (mm) 0.06 1.50 4.00 1.02 5.38 4.00 2.44 0.30 12.00 2 PULSEGUARD® SUPPRESSOR SURFAC

Key Features

  • Ultra-low capacitance.
  • Low leakage current.
  • Fast response time.
  • Bi-directional.
  • Withstands multiple ESD strikes.
  • Packaged in chip array (capacitor/resistor) format.
  • Compatible with pick-and-place processes.
  • Available on 2,000 piece reels (EIA-RS481).

📥 Download Datasheet

Datasheet Details

Part number CA10
Manufacturer Littelfuse
File Size 180.76 KB
Description SURFACE MOUNT ESD SUPPRESSORS/ 8-Line CA10
Datasheet download datasheet CA10 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CA100 COMPACT CAL MANUAL Omega
CA1004 Micropower Voltage Reference Calogic
CA1021 Cascadable Amplifier 10 to 1000 MHz Tyco Electronics
CA1031 Cascadable Amplifier 10 to 1000 MHz Tyco Electronics
CA1212 Cascadable Amplifier MA-COM

Other Datasheets by Littelfuse

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PULSEGUARD® SUPPRESSOR SURFACE MOUNT ESD SUPPRESSORS PRODUCT OVERVIEW 8-Line CA10 Obsoleted Part. Please consider PGB0010603, PGB002ST23 or PGB0040805 for new designs. PulseGuard ESD Suppressors help protect sensitive electronic equipment against electrostatic discharge (ESD). They supplement the on-chip protection of integrated circuitry and are best suited for low-voltage, high-speed applications where low capacitance is important. Applications such as computer I/O ports (eg. video displays), network hardware, cell phone data ports, point-ofsale terminals, and industrial controls will benefit from this new technology. PulseGuard suppressors use polymer composite materials to suppress fast-rising ESD transients (as specified in IEC 61000-4-2 and MIL-STD883E).