Datasheet4U Logo Datasheet4U.com

LS24062RQ23 - 28V 6A Bidirectional eFuse

General Description

The LS24062RQ23 is an advanced 28V 6A rated bidirectional load switch which provides overload, short circuit, input voltage surge, excessive inrush current and over-temperature protections to power the system.

Key Features

  • Wide Supply Voltage Range from 3V to 24V.
  • 30V Tolerance on Port VBUS1 and VBUS2.
  • Integrate a 24mΩ Ultra Low On Protection Switch.
  • External Adjustable Soft-Start Time.
  • External Adjustable Input Over-voltage Threshold.
  • Short-circuit Protection.
  • Fault Indicator.
  • Thermal Shutdown Protection and Auto Recovery.
  • Each Port VBUS1/VBUS2 Independent Control.
  • External Adjustable Current Limit.
  • Enable Interface Pin.
  • Port Discharge Interface Pin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LS24 Surface Mount Schottky Rectifier GOOD-ARK
LS248 BCD TO 7-SEGMENT DECODER National Semiconductor
LS24A Surface Mount Schottky Rectifier GOOD-ARK
LS24D16C-HS1 DC Controller Teledyne
LS24D27C DC Controller Teledyne

Other Datasheets by Littelfuse

Part Number Description
LS2406ERQ23 6A eFuse
LS2405IDD23 5A Very Low Forward Voltage Diode

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Protection IC Datasheet LS24062RQ23 28V 6A Bidirectional eFuse with Dual Port Independent Current Limit Setting RoHS Pb Description The LS24062RQ23 is an advanced 28V 6A rated bidirectional load switch which provides overload, short circuit, input voltage surge, excessive inrush current and over-temperature protections to power the system. The built-in 24mΩ ultra low RDS(ON) power switch helps reducing power loss during normal operation. The device features two input/output ports, VBUS1 and VBUS2, which are rated at 30V Absolute Maximum. Each port has independent enable, external current limit setting and discharge control pins. The integrated two N-channel power switch M1 and M2 in-series configuration blocks any leakage between VBUS1 and VBUS2 two ports when the device is disabled.