Datasheet4U Logo Datasheet4U.com

P4KE20CA - TVS Diode

Download the P4KE20CA datasheet PDF. This datasheet also covers the P4KE6.8A variant, as both devices belong to the same tvs diode family and are provided as variant models within a single manufacturer datasheet.

General Description

The P4KE Series is designed specifically to protect sensitive electronic equipment from EFTs, ESD, and induced lightning transients.

Key Features

  • 400W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%.
  • Glass passivated chip junction in DO-41 Package.
  • Fast response time: typically less than 1.0ps from 0 Volts to VBR min.
  • Excellent clamping capability.
  • Typical failure mode is a short circuit.
  • Whisker test is conducted per Table 4a/4c of JEDEC JESD201A.
  • IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact).
  • EFT protection of data lines in accor.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (P4KE6.8A-Littelfuse.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
P4KE20CA Transient Voltage Suppressor Diodes Diotec
P4KE20CA TVS MCC
P4KE20CA Transient Voltage Suppressors HITANO
P4KE20CA 400W TRANSIENT VOLTAGE SUPPRESSOR Won-Top Electronics
P4KE20CA GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS LITE-ON

Other Datasheets by Littelfuse

Part Number Description
P4KE200A TVS Diode
P4KE200CA TVS Diode
P4KE20A TVS Diode
P4KE220A TVS Diode
P4KE220CA TVS Diode

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
P4KE Series TVS Diode Axial Leaded – 400W > P4KE series RoHS Pb e3 Bi-directional Uni-directional Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note 1) -Single Die Parts Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note 1) -Stacked Die Parts (Note 4) Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC Peak Forward Surge Current, 8.