P4SMA350CA Datasheet | Littelfuse

Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - 400W peak pulse power - 260o C/40sec change to capability at 10/1000µs 260o C/30sec waveform, repetition rate (duty cycles):0.01% - VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature - Excellent clamping capability Coefficient, typical value is - Typical IR less than 1μA when 0.1%) VBR min>12V - Surface mount footprint for pact PCB layout - Low profile package - UL Recognized epoxy meeting flammability classification V-0 change to Plastic package is flammability rated V-0 per UL-94. - Typical failure mode due to exceeding maximum ratings is - Meet MSL level1, per J-STD-020, LF maximun peak a short circuit condition of 260°C - Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A - IEC 61000-4-2 ESD 30k V(Air), 30k V (Contact) - Built-in strain relief - Matte tin, lead- free plated - Halogen-free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is - Fast response time: typically tin(Sn) (IPC/JEDEC J-STD- less than 1.0ps from 0V to BV 609A.01) min Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Tele, puter, Industrial and Consumer electronic applications. Agency Agency Approvals Agency File Number E230531 Functional Diagram Cathode Bi-directional Uni-directional Anode © 2022 Littelfuse, Inc. Specifications...