P6SMB24A Datasheet | Littelfuse

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% - Excellent clamping capability - Low incremental surge resistance - Typical IR less than 1μA when VBR min>12V - Optimized surface mount footprint for minimal PCB space impact - Low profile package - Typical failure mode due to exceeding maximum ratings is a short circuit condition - Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A - IEC 61000-4-2 ESD 30k V(Air), 30k V (Contact) - EFT protection of data lines in accordance with IEC 61000-4-4 - Built-in strain relief - Fast response time: typically less than 1.0ps from 0V to VBR min - High temperature to reflow soldering guaranteed: 260°C/30sec - VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) - UL Recognized pound meeting flammability classification V-0 - Meet MSL level1, per J-STD-020, LF maximun peak of 260°C - Matte tin lead- free plated - Halogen free and Ro HS pliant - Pb-free E3 means 2ND level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) - UL Recognized to ANSI/UL 497B: Protectors for Data munications and Fire Alarm Circuits. Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Tele,...