SA28A
Description
The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
- 500W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
- VBR @ TJ= VBR@25°C x (1+αT x (TJ
- 25)) (αT:Temperature Coefficient, typical value is 0.1%)
- Glass passivated chip junction in DO-15 Package
- Fast response time: typically less than 1.0ps from 0 Volts to BV min
- Excellent clamping capability
- Typical failure mode is short from over-specified voltage or current
- Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
- IEC-61000-4-2 ESD 30k V(Air), 30k V (Contact)
- ESD protection of data lines in accordance with IEC 61000-4-2
- EFT protection of data lines in accordance with IEC 61000-4-4
- Low incremental surge resistance
- Typical IR less than 1μA when VBR max>13V
- High temperature to reflow soldering guaranteed: 260°C/40sec /...
