SLD33-018 Datasheet | Littelfuse

Description The AEC-Q101 qualified SLD Series is packaged in a highly reliable industry standard P600 axial leaded package and is designed to provide precision overvoltage protection for sensitive electronics. Bi-directional Web Resources Download ECAD models, order samples, and find technical recources at .littelfuse./sld Agency Agency Approvals Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA = 25°C unless otherwise noted) Parameter Peak Pulse Power Dissipation 10ms x 150ms Test Waveform Peak Pulse Power Dissipation 10μs x 1000μs Test Waveform Steady STLte Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 6) Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) Maximum Instlntlneous Forward Voltlge at 100A for Unidirectional Only Operating Junction and Storage Temperature Range Typical Thermal Resistlnce Junction to Lead Typical Thermal Resistlnce Junction to Ambient Symbol PPPM PPPM PD IFSM VF TJ, TSTG RƟJL RƟJA Value 2200 5000 8.0 600 3.5 -55 to 175 8.0 40 Unit W W W A V °C °C/W °C/W Features & Benefits - High reliability application and automotive grade AEC-Q101 qualified with TJ 175°C - VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature Coefficient, typical value is 0.1%) - Glass passivated chip junction in P600 package - Meets ISO7637 and ISO16750 load dump test; 2200W peak pulse capability at 10μs × 150ms waveform, repetition rate (duty cycles): 0.01% - Fast response time: typically less than 1.0ps from 0 Volts to VBR min - Excellent clamping capability - Typical failure mode is short from over-specified voltage or current - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - IEC-61000-4-2 ESD 30k V(Air), 30k V (Contact) - ESD protection of data lines in accordance with IEC 610004-2 - EFT protection of data lines in accordance with IEC 610004-4 - Low incremental surge resistance - High temperature to reflow soldering guaranteed: 260°C/10sec / 0.375”, (9.5mm) lead length, 5...