SMCJ15CA Datasheet | Littelfuse

FEATURES SMCJ Series ® - Ro HS pliant - For surface mounted applications in order to optimize board space - Low profile package - Built-in strain relief - Glass passivated junction - Low inductance - Excellent clamping capability - Repetition Rate(duty cycle): 0.05% - Fast response time: typically less than 1.0ps from 0 Volts to BV min. - Typical IR less than 1m A above 10V - High temperature soldering: 250˚C/10 seconds at terminals - Plastic package has Underwriters Laboratory Flammability MAXIMUM RATINGS AND CHARACTERISTICS @25˚C AMBIENT TEMPERATURE (unless otherwise noted) PARAMETER SYMBOL PPPM IPPM IFSM VALUE Min 1500 See Table 1 UNIT Watts Amps 94V-O Agency Approvals: Recognized under the ponents Program of Underwriters Laboratories. Agency File Number: E128662 Peak Pulse Power Dissipation on 10/1000µs waveform (note 1,2,FIG.1) Peak Pulse Current of on 10/1000µs waveform (note 1,FIG.3) Peak Forward Surge Current, 8.3ms Single Half SIne Wave Superimposed on Rated Load, (JEDEC Method) (note 2,3) Operating junction and Storage Temperature Range Amps Tj, Ts TG -55 to +150 °C Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA=25˚C per Fig 2 2. Mounted on 8.0mm2.Copper Pads to each terminal 3. 8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. ORDERING INFORMATION SMCJ C A Mechanical Specifications: Weight: Case: Mounting Position: Polarity: Terminal: Standard Packaging: 0.007ounce, 0.21 gram JEDEC DO-214AB Molded Plastic over glass passivated junction Any Color band denotes cathode except Bidirectional Solder Plated, solderable per MIL-STD-750, Method 2026 16mm tape (EIA STD RS-481) Voltage Bi-Directional 5% Voltage Tolerance Tape and reeled (3000 pcs) 274 w w w. l i t t e l f u s e . c o m Silicon Avalanche Diodes 1500W Surface Mount Transient Voltage Supressors Ro HS SMCJ Series Part Number (Bi) Device Marking Code Reverse Stand off Voltage VR (Volts) 5.0 6.0 6.5 7.0 7.5...