SMDJ24CA Datasheet | Littelfuse

Description The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - 3000W PPPM capability at 10/1000μs waveform, - Low incremental surge resistance repetition rate (duty cycles):0.01% - For surface mounted applications in order to optimize board space - Typical IR less than 2μA when VBR min>12V - High temperature to reflow soldering guaranteed: 260°C/30sec - Low profile package - VBR @ TJ= VBR@25°C x (1+αT - Typical failure mode is short x (TJ - 25))(αT:Temperature from over-specified voltage or Coefficient, typical current value is 0.1%) - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - UL Recognized pound meeting flammability rating V-0 - IEC-61000-4-2 ESD 30k V(Air), - Meet MSL level1, per 30k V (Contact) J-STD-020, LF maximun peak - ESD protection of data lines of 260°C in accordance with - Matte tin lead- free plated IEC 61000-4-2 - Halogen free and - EFT protection of data lines in Ro HS pliant accordance with IEC 61000-4-4 - Pb-free E3 means 2nd level interconnect is Pb-free and - Built-in strain relief the terminal finish material is - Glass passivated chip junction - Fast response time: typically tin(Sn) (IPC/JEDEC J-STD609A.01) less than 1.0ps from 0V to BV min - Excellent clamping capability Applications TVS ponents are ideal for the protection of I/O Interfaces, VCC bus and other...