SMF12A Overview
The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. SMF package is 50% smaller in footprint when pare to SMA package and deliverying one of the low height profiles (1.1mm) in the industry. Additional Information Bi-directional Resources Accessories Samples Agency Agency Approvals RƟJA RƟJL TJ TSTG 1000 W 100 °C/W -65 to 150 °C -65 to 175 °C Notes:
SMF12A Key Features
- 200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01%
- patible with industrial standard package SOD-123FL
- Low profile: maximum height of 1.1mm
- Low inductance, excellent clamping capability
- For surface mounted
SMF12A Applications
- High temperature to reflow soldering guaranteed: 260°C/30sec
- Typical failure mode is short from over-specified voltage or current
- Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
- IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
- ESD protection of data lines in accordance with IEC 61000-4-2
- EFT protection of data lines in accordance with IEC 610004-4
- Fast response time: typically less than 1.0ns from 0 Volts to VBR min
- Glass passivated junction
