SMF60A Datasheet | Littelfuse

Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. SMF package is 50% smaller in footprint when pare to SMA package and deliverying one of the low height profiles (1.1mm) in the industry. Features - 2 00W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01% - patible with industrial standard package SOD-123FL - L ow profile: maximum height of 1.1mm. - Low inductance, excellent clamping capability - F or surface mounted applications to optimize board space - H igh temperature to reflow soldering guaranteed: 260°C/430sec - Typical failure mode is short from over-specified voltage or current - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - IEC-61000-4-2 ESD 30k V(Air), 30k V (Contact) - E SD protection of data lines in accordance with IEC 61000-4-2 - E FT protection of data lines in accordance with IEC 61000-4-4 - F ast response time: typically less than 1.0ns from 0 Volts to VBR min - Glass passivated junction - Built-in strain relief - Plastic package is flammability rated V-0 per Underwriters Laboratories - Meet MSL level1, per J-STD-020, LF maximun peak of 260°C - Matte tin lead- free plated - Halogen-free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01) - UL Recognized to UL 497B Additional Infomarion Resources Samples Applications SMF devices are ideal for the protection of I/O interfaces, p Vh CCobnuess,apnodrtoatbhleerdveuvlniceersa,bbleusciinrceusist used in cellular machines, power supplies and other consumer applications. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/02/20 TVS Diodes Surface Mount - 200W > SMF Series Electrical Characteristics (TA=25°C unless otherwise noted) Part Number Marking Code Breakdown...