SP03-6BTG Datasheet | Littelfuse

Description This new broadband protection ponent from Littelfuse provides overvoltage protection for applications such as 10/100/1000 Base T Ethernet, T3/E3 DS3 interfaces, ADSL2+, and VDSL2+. This new protector bines the TVS diode element with a diode rectifier bridge to provide both longitudinal and differential protection in one package. This design innovation results in a capacitive loading characteristic that is log-linear with respect to the signal voltage across the device. This reduces intermodulation (IM) distortion caused by a typical solid-state protection solution. The application schematic provides the connection information. Features - Ro HS pliant - SOIC-8 surface mount package (JEDEC MS-012) - Low insertion loss, log- linear capacitance - bined longitudinal and metallic protection - Clamping speed of nanoseconds - UL Recognized pound meeting flammability rating V-0 - Lightning, 150A (8/20 as defined in IEC 61000-4-5 2nd edition) - Low clamping voltage Applications - T1/E1 Line cards - T3/E3 and DS3 Interfaces - STS-1 Interfaces - 10/100/1000 Base T Ethernet Application Example Tele Link (0461 1.25) TIP RING SP03-6 5 to chipset (Ethernet PHY, T3/E3 PHY, etc.) This schematic shows a high-speed data interface protection solution. The SP03-6 provides both metallic (differential) and longitudinal (mon mode) protection from lightning induced surge events. Its surge rating is patible with the intra-building surge requirements of Telcordia’s GR-1089-CORE, and the Basic Level Remendations of ITU K.20 and .21. This ponent protects against both positive and negative induced surge events. The Tele Link fuse provides overcurrent protection for the long term 50/60 Hz power fault events. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/05/18 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection - SP03-6 Series Absolute Maximum Ratings Parameter Peak Pulse Current (8/20µs) Peak Pulse Power...