Datasheet4U Logo Datasheet4U.com

SP1255P - 12kV Diode Array

General Description

The SP1255P integrates three channels of ultra-low capacitance steering diodes and a low voltage TVS diode to provide maximum protection of the USB data and ID pins against ESD per the IEC 61000-4-2 standard.

Key Features

  • RoHS compliant and lead-free.
  • AEC-101 qualified For USB Voltage Bus Pin (VBUS).
  • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air.
  • EFT, IEC 61000-4-4, 80A (tP=5/50ns).
  • Lightning, IEC 61000-4-5, 100A (tP=8/20μs).
  • Protection for VBUS operating up to 12V.
  • Benchmark setting protection.
  • High current handling capability for fast charging.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP125F (SP125F / SP150F) Rectifier Stacks VMI
SP12 TYRE PRESSURE SENSOR WITH ACCELEROMETER Infineon Technologies AG
SP1203N HARD DISK DRIVE service manual Samsung
SP1204 SP-1204 Sipex
SP1213 METALLIZED POLYPROPYLENE Electronic Film Capacitors

Other Datasheets by Littelfuse

Part Number Description
SP1255 TVS Diode Arrays
SP1212 12A Discrete Unidirectional TVS Diode
SP1220 20A Discrete Unidirectional TVS Diode
SP1233 20A Discrete Bidirectional TVS Diode
SP1002 TVS Diode Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TVS Diode Array (SPA®Diodes) Low Capacitance ESD and Surge Protection - SP1255P Series SP1255P Series 0.5pF, 12kV Diode Array for μUSB RoHS Pb GREEN Pinout Bottom View Functional Block Diagram PIN 2 (D+) PIN 3 (D-) PIN 4 (ID) PIN 1 (V BUS) PIN 5,6 (GND) Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. Description The SP1255P integrates three channels of ultra-low capacitance steering diodes and a low voltage TVS diode to provide maximum protection of the USB data and ID pins against ESD per the IEC 61000-4-2 standard.