SP1305 Datasheet | Littelfuse

Description The SP1305 TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic discharge (ESD), electrical fast transients (EFT), and lightning induced surges. The SP1305 can absorb repetitive ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard without performance degradation and safely dissipate up to 5A of 8/20μs induced surge current (IEC 61000-4-5, 2nd Edition) with very low clamping voltages. Pinout and Functional Block Diagram 1 3 Features - ESD, IEC 61000-4-2, ±30k V contact, ±30k V air - EFT, IEC 61000-4-4, 50A (5/50ns) - Lightning, 5A (8/20μs as defined in IEC 61000-4-5 2nd Edition) - Low clamping voltage - Low leakage current - AEC-Q101 qualified - Moisture Sensitivity Level (MSL-1) - Halogen free, lead free and Ro HS pliant Applications - Industrial equipment - Test and medical equipment - Point-of-Sale terminals - Motor controls - Legacy ports (RS-232, RS-485) - Security and alarm system Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. ©2019 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 04/11/19 TVS Diode Arrays (SPA®®Diodes) General Purpose ESD Protection - SPM12340C5ANA Absolute Maximum Ratings Symbol IPP TOP TSTOR Parameter Peak Pulse Current (tp=8/20μs) Operating Temperature Storage Temperature Value 5.0 -40 to 125 -55 to 150 Units A °C °C Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the ponent. This is a stress only rating and operation of the ponent at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (TOP=25ºC) Parameter Reverse Standoff Voltage Breakdown Voltage Reverse Leakage Current Clamp Voltage1...