TPSMB11CA-VR Datasheet | Littelfuse

Description The TPSMB-VR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - High reliability application - Low incremental surge and automotive grade AEC resistance Q101 qualified - Typical IR ≤ 1µA for VR > 10V - Surface mount ponent - High temperature to minimize board space soldering guaranteed: - Low profile package 260°C/10 seconds at - Typical failure mode is terminals short from over-specified - UL Recognized pound voltage or current meeting flammability - Whisker test is conducted rating V-0. based on JEDEC - Meet MSL level1, JESD201A per its table 4a per J-STD-020, high and 4c temperature soldering - ESD protection of data guaranteed. lines in accordance with - Matte tin lead- free plated IEC 61000-4-2, 30k V(Air), - Halogen free and Ro HS 30k V (Contact) pliant - EFT protection of data lines in accordance with IEC 61000-4-4 - Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish - G lass passivated chip material is tin(Sn) (IPC/ junction JEDEC J-STD-609A.01) - 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% - Recognized to UL 497B as an Isolated Loop Circuit Protector - Fast response time: typically less than 1.0ns from 0V to VBR min - Excellent clamping capability Applications TVS ponents are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Automotive applications. © 2020 Littelfuse, Inc. Specifications are subject to change without...