V460LA20AP Datasheet | Littelfuse

Description The LA Varistor Series of transient voltage surge suppressors are radial leaded varistors (MOVs) that are designed to be operated continuously across AC power lines. These UL recognized varistors require very little mounting space, and are offered in various standard lead form options. The LA Varistor Series are available in four model sizes: 7mm, 10mm, 14mm and 20mm; and have a VM(AC)RMS voltage range from 130V to 1000V, and an energy absorption capability up to 360J. Some LA Series model numbers are available with clamping voltage selections, designated by a model number suffix of either A or B. The 'A' selection is the standard model; the 'B' selection provides a lower clamping voltage. See LA Series Device Ratings and Specifications Table for part number and brand information. Features - Lead- free, Halogen Free and Ro HS pliant. - Energy absorption capability (WTM) up to 360J - Wide operating voltage range VM(AC)RMS 130V to 1000V - No derating up to 85ºC ambient - Available in tape and reel or bulk pack Absolute Maximum Ratings - For ratings of individual members of a series, see Device Ratings and Specifications chart Continuous Steady State Applied Voltage: AC Voltage Range (VM(AC)RMS) DC Voltage Range (VM(DC)) Transients: Peak Pulse Current (ITM) For 8/20µs Current Wave (See Figure 2) Single Pulse Energy Range For 10/1000µs Current Wave (WTM) Operating Ambient Temperature Range (TA) Storage Temperature Range (TSTG) Temperature Coefficient (a V) of Clamping Voltage (VC) at Specified Test Current Hi-Pot Encapsulation (COATING Isolation Voltage Capability) (Dielectric must withstand indicated DC voltage for one minute per MIL-STD 202, Method 301) COATING Insulation Resistance LA Series 130 to 1000 175 to 1200 1200 to 6500 11 to 360 -55 to +85 -55 to +125 <0.01 2500 1000 Units J OC OC %/OC V MΩ CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and...