LT1548 Datasheet | Longtium Microelectronics

High Precision CC/CV Primary-Side PWM Power Switch GENERAL DESCRIPTION LT1548 is a high performance offline PWM Power switch for low power AC/DC charger and adaptor applications. It operates in primary-side sensing and regulation. Consequently, opto-coupler and TL431 could be eliminated. Proprietary Constant Voltage (CV) and Constant Current (CC) control is integrated as shown in the figure below. In CC control, the current and output power setting can be adjusted externally by the sense resistor Rs at CS pin. In CV control, multi-mode operations are utilized to achieve high performance and high efficiency. In addition, good load regulation is achieved by the built-in cable drop pensation. Device operates in PFM in CC mode as well at large load condition and it operates in PWM with frequency reduction at light/medium load. LT1548 offers power on soft start control and protection coverage with auto-recovery Features including Cycle-by-Cycle current limiting, VDD OVP, VDD clamp and UVLO. Excellent EMI performance is achieved with On-Bright proprietary frequency shuffling technique. High precision constant voltage (CV) and constant current (CC) can be achieved by LT1548. Features - - - - - - - - - - - - - - 5% Constant Voltage Regulation, 5% Constant Current Regulation at Universal AC input Primary-side Sensing and Regulation Without TL431 and Opto-coupler Programmable CV and CC Regulation 白光LED 升压型驱动器 Adjustable Constant Current and Output Power Setting Built-in Secondary Constant Current Control with Primary Side Feedback Built-in Adaptive Current Peak Regulation Built-in Primary winding inductance pensation Programmable Cable drop pensation 2 Power on Soft-start Built-in Leading Edge Blanking (LEB) Cycle-by-Cycle Current Limiting VDD Under Voltage Lockout with Hysteresis (UVLO) VDD OVP,VDD Clamp Offered in DIP8 package APPLLICATIONS Low Power AC/DC offline SMPS for : - Cell Phone Charger， Digital Cameras Charger - Small Power Adaptor -...