LT7911D
LT7911D is Type-C to Dual-port MIPI DSI/CSI manufactured by Lontium.
Features
- Type-C
- pliant with VESA Display Port Alt Mode on USB Type C Standard version1.0
- pliant with USB Power Delivery Rev.2.0
- patible with USB Type-C V1.1
- pliant with HDMI 1.4b Alt Mode on USB Type-C specification V1.0
- Built-in CC controller for plug and orientation detection
- Dual-port CC for charger and normal munication.
- DP/e DP Receiver
- pliant with Display Port Specification 1.2 for 1.62Gbps, 2.7Gbps ,5.4Gbps
- pliant with Display Port Specification version 1.2 and Embedded Display Port (e DP) Specification version 1.4
- Support Display Port 1, 2，4 lanes
- Support HDCP 1.3
- Support e DP Authentication: Alternative Scramble Seed Reset and Alternative Framing
- Fast and full Link Training for embedded Display Port system
- Adaptive Display Port Receiver Equalization for PCB, cable and connector losses
- Support AUX and IIC for firmware updating
- Single/Dual-Port MIPI® DSI/CSI Transmitter
- pliant with DCS1.02, D-PHY1.2& DSI1.02 &CSI-2 1.0
- 1 Clock Lane, and 1~4 Configurable Data Lanes per port
- 1/2 configurable port
- 80Mb/s~1.5Gb/s per data lane
- Data lane and polarity swapping
- Maximum 64pixels overlap for each half
- Both non-burst and burst video mode supported
- Support RGB666, Loosely RGB666, RGB888, RGB565, 16-bit YCb Cr4:2:2,20-bit YCb Cr4:2:2,24-bit YCb Cr 4:2:2, 12-bit YCb Cr4:2:0Video Format
- Video stream copy mode for each single/dual-port
- Side-by-side 3D support
- Port swap
- Miscellaneous
- 3.3V/1.2V Supply Power
LT7911D Datasheet R1.2
- Internal CSC support conversions between YCb Cr 4:4:4 and RGB, and between YCb Cr 4:2:2 and YCb Cr 4:4:4
- Support SPDIF and 2-channel IIS audio output
- Support 100KHz and 400KHz I2C slave
- Power from phone or adapter mode selection
- Integrated Microprocessor
- Embedded EDID shadow.
- Temperature Range: -40°C ~ +85°C
- ESD 4k V...
