Datasheet4U Logo Datasheet4U.com

LP4076H - 1A Single Chip Li-Ion and Li-Polymer Charger

General Description

The LP4076H is a complete constant-current/ constant voltage linear charger for single cell lithium-ion battery.

Its ESOP8 package and low external component count make the device ideally suited for portable applications.

Key Features

  • include charge current monitor, under voltage lockout, automatic recharge and charge status pins. Order Information LP4076H Battery Voltage Default: 4.2V 435: 4.35V F: Pb-Free Package Type SP: ESOP8 Features.
  • Input Voltage up to 28V.
  • Input Over Voltage Protection：7V.
  • Short-circuit protection.
  • Programmable Charge Current up to 1A.
  • 1µA Battery Reverse Current.
  • Protection of Reverse Connection of Battery.
  • No MOSFET, Sense Resistor or Blocking Diode Required.

📥 Download Datasheet

Datasheet Details

Part number LP4076H
Manufacturer Lowpowersemi
File Size 477.50 KB
Description 1A Single Chip Li-Ion and Li-Polymer Charger
Datasheet download datasheet LP4076H Datasheet

Other Datasheets by Lowpowersemi

Part Number Description
LP4054 500mA Standalone Linear Li-Ion Battery Charger
LP4055 800mA Linear Li-Ion Battery Charger
LP4056 1A/800mA Standalone Linear Li-Ion Battery Charger
LP4060 800mA Standalone Linear Li-Ion Battery Charger
LP4060A 800mA Standalone Linear Li-Ion Battery Charger
LP4061 800mA Standalone Linear Li-Ion Battery Charger
LP4062 600mA Standalone Linear Li-Ion Battery Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Datasheet LP4076H 1A Single Chip Li-Ion and Li-Polymer Charger General Description The LP4076H is a complete constant-current/ constant voltage linear charger for single cell lithium-ion battery. Its ESOP8 package and low external component count make the device ideally suited for portable applications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at VFLOAT, and the charge current can be programmed externally by ISET pin with a single resistor.