Datasheet Details
| Part number | L7591 |
|---|---|
| Manufacturer | Lucent Technologies |
| File Size | 159.24 KB |
| Description | Subscriber Line Interface Circuit Protector |
| Download | L7591 Download (PDF) |
|
|
Overview: Data Sheet October 1997 L7591 Subscriber Line Interface Circuit.
| Part number | L7591 |
|---|---|
| Manufacturer | Lucent Technologies |
| File Size | 159.24 KB |
| Description | Subscriber Line Interface Circuit Protector |
| Download | L7591 Download (PDF) |
|
|
|
s Shunts lightning pulses to ground — Positive or negative 30 A, 10 x 1000 µs — Positive or negative 40 A, 5 x 320 µs — Positive or negative 80 A, 2 x 10 µs s Power-cross protection — 3.5 APEAK, 50 Hz to 60 Hz, 1 s — 5.0 APEAK, 50 Hz to 60 Hz, 10 ms s Gate trigger current, 15 mA max s Up to –80 V capability s Holding current, 150 mA min Pin Information The L7591 Subscriber Line Interface Circuit (SLIC) Protector is designed to protect line-feed circuitry from fault-induced lightning and power-cross surge pulses.
If a fault current forces TIP and/or RING to a more negative voltage than VS, current is conducted through the trip circuit.
When the specified trip current level is reached, transistors PNPN1 and/or PNPN2 will turn on and "crowbar" the majority of the current to ground.
| Part Number | Description |
|---|---|
| L7554 | Low-Power SLIC |
| L7556 | Low-Power SLICs |
| L7557 | Low-Power SLICs |
| L7581 | Ringing Access Switch |
| L7582 | Tip Ring Access Switch |
| L7583A | Line Card Access Switch |
| L7583B | Line Card Access Switch |
| L7583C | Line Card Access Switch |
| L7583D | Line Card Access Switch |