Datasheet4U Logo Datasheet4U.com

IS31CG1110 - MIMO/SISO Differential Line Driver

General Description

The CG1110 is a high-performance MIMO/SISO dual port differential line driver designed to work in broadband PLC system.

It contains two pairs of wideband, high-voltage, current mode feedback amplifiers.

Key Features

  •  Single +10V to +13.2V supply  Fixed voltage gain of 25dB (AV=18 V/V)  100MHz -3dB closed-loop signal bandwidth  High linearity MTPR of 50dBc  350mA max. output driver capability  16.4Vpp-diff linear output drive into 34Ω  25mA quiescent current per port  Control pins for enable/disable  Internal VCM for input signal biasing  Fast shut down / power up.
  • less than 1us  Thermal shut-down & output short protection  Supports 20-pin, 4mmx4mm QFN Package  -40°C to +85°C operating.

📥 Download Datasheet

Datasheet Details

Part number IS31CG1110
Manufacturer Lumissil
File Size 519.92 KB
Description MIMO/SISO Differential Line Driver
Datasheet download datasheet IS31CG1110 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IS314P Photocoupler ISOCOM
IS314W Photocoupler ISOCOM
IS31AP2005 2.95W MONO FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER ISSI
IS31AP2006 3W MONO FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER ISSI
IS31AP2010B MONO FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER ISSI

Other Datasheets by Lumissil

Part Number Description
IS31CS5523 MCU
IS31CS8964 Low Standby Power 8051 MCU
IS31CS8974 MCU
IS31AP2005 2.95W MONO FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER
IS31AP4990D 1.2W AUDIO POWER AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IS31CG1110 PRELIMINARY MIMO/SISO Differential Line Driver GENERAL DESCRIPTION The CG1110 is a high-performance MIMO/SISO dual port differential line driver designed to work in broadband PLC system. It contains two pairs of wideband, high-voltage, current mode feedback amplifiers. The line driver can operate on single supply from +10V to +13.2V and retains its bandwidth and linearity over the complete full-scale supply range. The supply current can be set using a resistor on the IBIAS pin. The device has two separate disable control pins (ENB_AB and ENB_CD) for each differential amplifier to allow TDM operation. These logic pins are internally pulled high, so floating these inputs will put the device in shut down mode.