Datasheet4U Logo Datasheet4U.com

MT5032A - 800kHz Synchronous Step-up Converter

General Description

The MT5032A devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer battery.

The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip.

Key Features

  • Synchronous Step-up Converter with 2.1A Output Current From 3V Input Wide VIN Range From 2.9V to 5.5V Input Under-voltage Lockout Protection Fixed and Adjustable Output Voltage Built-in Output Over-voltage Protection Light-Load Pulse Skip Mode Load Disconnect During Shutdown Output Short Circuit Protection Thermal Shutdown Protection Available in a SOP8_EP Packages.

📥 Download Datasheet

Datasheet Details

Part number MT5032A
Manufacturer M3TEK
File Size 347.49 KB
Description 800kHz Synchronous Step-up Converter
Datasheet download datasheet MT5032A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MT5004A Three Phase Bridge Rectifier MCC
MT5006A Three Phase Bridge Rectifier MCC
MT5008A Three Phase Bridge Rectifier MCC
MT5010A Three Phase Bridge Rectifier MCC
MT5012A Three Phase Bridge Rectifier MCC

Other Datasheets by M3TEK

Part Number Description
MT5032 800kHz Synchronous Step-up Converter
MT5030 95% Efficient 1.2MHz Synchronous Step-up Converter
MT5033 800kHz Synchronous Step-up Converter
MT5086 Quiescent Current Synchronous Boost Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M3TEK Preliminary Datasheet MT5032A 800kHz Synchronous Step-up Converter with 5.5A Switches DESCRIPTION The MT5032A devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 2.1A at 5V at a supply voltage down to 3V. The maximum peak current in the step-up switch is limited to a value of 5.5A. The MT5032A operates at 800kHz switching frequency and enters pulse-skip-mode (PSM) operation at light load currents to maintain high efficiency over the entire load current range.