MAPDCT0024 Datasheet | MACOM Technology Solutions

Features - - - - - Surface Mount 2 Way 0º Ro HS- pliant 260ºC reflow pliant Rev. V4 Schematic with external resistor Description M/A- Technology Solutions MAPDCT0024 is a 2 Way 00 Power Divider in a low cost, surface mount package. Ideally suited for high volume CATV applications. An external 160Ω Chip resistor is required with this part. ponent Dimensions: 3.50mm 6 7.20mm R3.13mm 2 3 TOP VIEW 5 4 SIDE VIEW 2.65mm Pin Configuration Pin No. Function 6.55mm 4 2.85mm 1.04mm Input Ground Not Connected Port 1 Port 2 6 1 2, 5 4 3 2 1 BOTTOM VIEW 5 6 Remended PCB Design 1.50mm Dimensions in mm. Tolerance: ± 0.20, unless otherwise stated. Drawing not to scale. ADVANCED: Data Sheets contain information regarding a product M/A- Technology Solutions - North America Tel: 800.366.2266 - Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, - India Tel: +91.80.43537383 - China Tel: +86.21.2407.1588 and/or prototype measurements. mitment to develop is not guaranteed. Visit .matech. for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A- Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A- Technology Solutions Inc. and its affiliates reserve the right to make mitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. 2 Way 0º Power Divider 5 - 1200 MHz Rev. V4 Electrical Specifications: TA = 25°C, Z0 = 75Ω Parameter Test Conditions Units Min. Typ. Max. Insertion Loss (Ref. Level - 3d B) - 500MHz 500 - 870MHz 870 - 1002Mhz...