Datasheet4U Logo Datasheet4U.com

MD-148 - Double-Balanced Mixer

This page provides the datasheet information for the MD-148, a member of the MD-148-MA Double-Balanced Mixer family.

Description

Transformers convert the LO and RF paths to balanced lines connecting to a medium barrier, Schottky diode ring quad.

These transformers help provide excellent isolation between ports.

Conversion loss is low.

Features

  • n Fully Hermetic Package n 1 dB Compression Point: +5 dBm n Conversion Loss: 6 dB Typical Midband n LO-RF/LO-IF Isolation: 40 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 300 mW Max, Derated to 85°C @ 3.2 mW/°C n X Port Current: 50 mA Max. n MIL-STD-883 Screening Available.

📥 Download Datasheet

Datasheet preview – MD-148

Datasheet Details

Part number MD-148
Manufacturer MA-COM
File Size 50.91 KB
Description Double-Balanced Mixer
Datasheet download datasheet MD-148 Datasheet
Additional preview pages of the MD-148 datasheet.

📁 Similar Datasheet

  • MD-113 - High Performance Double-Balanced Mixer (Tyco)
  • MD-124 - Double-Balanced Mixer (Tyco)
  • MD-156 - Flatpack Double-Balanced Mixer (Tyco)
  • MD-158 - Double-Balanced Mixer (Tyco)
  • MD-169 - Termination Insensitive Mixer (Tyco)
  • MD-169 - Termination Insensitive Mixer (MACOM)
  • MD-179 - Termination Insensitive Mixer (Tyco Electronics)
  • MD-179 - Termination Insensitive Mixer (MACOM)
  • MD-2070 - STEREO MINIDISC RECORDER INSTRUCTION MANUAL (Kenwood)
  • MD-2310 - Single Digit 7-Segment Numeric Display (MIKWANG)
Other Datasheets by MA-COM
  • MD-140 - Double-Balanced Mixer
  • MD-149 - Double-Balanced Mixer
  • MD-108 - Double-Balanced Mixer
  • MD-123 - Double-Balanced Mixer
  • MD-124 - Double-Balanced Mixer
  • MD-158 - Termination Insensitive Mixer
  • MD-160 - Termination Insensitive Mixer
  • MD-161 - Termination Insensitive Mixer

Full PDF Text Transcription

Click to expand full text
MD- / MDS-148 Double-Balanced Mixer, 10 - 1500 MHz Features n Fully Hermetic Package n 1 dB Compression Point: +5 dBm n Conversion Loss: 6 dB Typical Midband n LO-RF/LO-IF Isolation: 40 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 300 mW Max, Derated to 85°C @ 3.2 mW/°C n X Port Current: 50 mA Max. n MIL-STD-883 Screening Available Description Transformers convert the LO and RF paths to balanced lines connecting to a medium barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. FP-2 (MD-148) SF-1 (MDS-148) Rev. V4 Pin Configuration (MD-148) Pin No.
Published: |