Datasheet4U Logo Datasheet4U.com

MSPD1018 - Sampling Phase Detector Modules

Download the MSPD1018 datasheet PDF. This datasheet also covers the MSPD1000-MA variant, as both devices belong to the same sampling phase detector modules family and are provided as variant models within a single manufacturer datasheet.

General Description

The sampling phase detector (SPD) module is a hybrid circuit providing a fast step recovery diode, coupling capacitors and a low barrier Schottky pair.

Key Features

  • Phase Locking to 22 GHz.
  • Phase Locks DRO’s and VCO’s.
  • Fully Integrated Module.
  • Broadband Capability.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MSPD1000-MA-COM.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MSPD1011 Sampling Phase Detectors Aeroflex
MSPD1012 Sampling Phase Detectors Aeroflex
MSPD1013 Sampling Phase Detectors Aeroflex
MSP-600 DIGITALLY COMPENSATED EMI/RFI PROTECTED STAINLESS STEEL ISOLATED PRESSURE TRANSDUCER ETC
MSP0203 P-Channel Enhancement Mode Power MOSFET MORESEMI

Other Datasheets by MACOM Technology Solutions

Part Number Description
MSPD1011 Sampling Phase Detectors
MSPD1012 Sampling Phase Detector Modules
MSPD1012 Sampling Phase Detectors
MSPD1013 Sampling Phase Detectors
MSPD1000 Sampling Phase Detector Modules

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MSPDxxxx-x Series Sampling Phase Detector Modules Features  Phase Locking to 22 GHz  Phase Locks DRO’s and VCO’s  Fully Integrated Module  Broadband Capability Description The sampling phase detector (SPD) module is a hybrid circuit providing a fast step recovery diode, coupling capacitors and a low barrier Schottky pair. The Schottky pair is used as a sampling circuit turned on by the fast step from the step recovery diode (SRD), or in the frequency domain, the Schottky acts as a mixer to mix the harmonic of the SRD step closest to the microwave frequency. The output is a beat frequency (the difference between the harmonic of the reference and the microwave frequency) and is just a DC voltage at the lock point.