MX29F800CB
Key Features
- GENERAL FEATURES
- Single Power Supply Operation - 4.5 to 5.5 volt for read, erase, and program operations
- Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector
- Latch-up protected to 100mA from -1V to Vcc + 1V
- High Performance - Access time: 70ns - Byte/Word program time: 9us/11us (typical) - Erase time: 0.7s/sector, 8s/chip (typical)
- Low Power Consumption - Low active read current: 40mA (maximum) at 5MHz - Low standby current: 1uA (typical)
- Minimum 100,000 erase/program cycle
- 20 years data retention SOFTWARE FEATURES
- Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased
- Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation pletion HARDWARE FEATURES
