Datasheet4U Logo Datasheet4U.com

MAS9280 - IC FOR 18.00 - 40.00 MHz VCTCXO

General Description

The MAS9280 is an integrated circuit well suited to build VCTCXO for mobile communication.

Temperature calibration is achieved in three calibration temperatures only.

The trimming is done through a serial bus and the calibration information is stored in an internal PROM.

Key Features

  • Very small size Minimum Vdd 2.4V No voltage reference capacitor needed Phase noise.

📥 Download Datasheet

Datasheet Details

Part number MAS9280
Manufacturer MAS
File Size 163.11 KB
Description IC FOR 18.00 - 40.00 MHz VCTCXO
Datasheet download datasheet MAS9280 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAS9251 REGULATED CHARGE PUMP DC/DC CONVERTER ETC
MAS9011 Solar Cell Systems Manager IC Micro Analog Systems
MAS9078 Stand-alone am Receiver ic Micro Analog Systems
MAS9079 Stand-alone Tri Band Time Signal AM Receiver IC Micro Analog Systems
MAS9081 Stand-alone Dual Band Time Signal AM Receiver IC Micro Analog Systems

Other Datasheets by MAS

Part Number Description
MAS9281 IC FOR 10.00 - 60.00 MHz XO
MAS9283 IC FOR 10.00 - 56.00 MHz VCXO
MAS9285 IC FOR XO TRIMMING
MAS9270 IC FOR 10.00 - 30.00 MHz VCTCXO
MAS9271 IC FOR 10.00 - 40.00 MHz PXO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DA9280.003 13 July 2006 MAS9280 This is preliminary information on a new product under development. Micro Analog Systems Oy reserves the right to make any changes without notice. IC FOR 18.00 – 40.00 MHz VCTCXO • • • • • • Min. Supply Voltage 2.4 V Max. Frequency 40 MHz True Sine Wave Output Frequency Stability +/- 1.5 ppm Suitable Also for Low Pull Crystals Very Low Phase Noise DESCRIPTION The MAS9280 is an integrated circuit well suited to build VCTCXO for mobile communication. Temperature calibration is achieved in three calibration temperatures only. The trimming is done through a serial bus and the calibration information is stored in an internal PROM. This means no rework for trimming is needed. To build a VCTCXO additionally only a crystal is required.