MT3508G Datasheet | MIC GROUP RECTIFIERS

FEATURES - - - - VOLTAGE RANGE CURRENT 1600 Volts 35 Amperes MT-35 1.137(28.9) 1.118(28.4) + Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation Glass passivated chip junction Surge overload rating to 400 ampers High temperature soldering guaranteed: 260℃/10 seconds,/5 lbs tension 1.137(28.9) 1.118(28.4) 0.208 (5.3) 0.196 (5.0) 0.65(16.5) 0.61(15.5) - 0.980(24.9) 0.94(23.9) MECHANICAL DATA - - .322 (8.2) .307 (7.8) - - Case:Epoxy, Molded Plastic with heaksink integrally Mounted in the bridge encapsulation. Mounting Position: Bolt down on heatsink with silicone Thermal pound between bridge and mounting Surface for maximum heat transfer efficiency Mounting Torque: 20 in,lbs max Weight: 0.706 ounce, 20 gram 0.933(23.7) 0.787(20.0) 0.033 (0.84) .25 (6.4) .25 (6.3) 0.028 (0.71) φ0.07(1.85) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS - - - Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% MT3508G SYMBOLS Peak Repetitive Reverse Voltage VRRM 800 Working Peak Reverse Voltage VRMS 800 Maximum DC Blocking Voltage VDC 800 Maximum Average Forward Rectified Output Current, at TC=55℃ (Note 2) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 17.5A Maximum DC Reverse Current at rated DC blocking voltage per element TA=25℃ Typical Thermal Resistance per Element Isolation Voltage from case to lug Operating and Storage Temperature Range MT3512G MT3516G 1200 1200 1200 35 400 1030 1.2 5.0 2.0 2500 (-55 to +150) 1600 1600 1600 UNIT Volts Volts Volts Amps Amps A2s Volts µAmps ℃/W I(AV) IFSM I2 t VF IR RΘJC VISO TJ ,TSTG ℃ Notes: 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 2.Unit mounted on 11.8”×11.8”×0.6”...