SMB24A Datasheet | MIC GROUP RECTIFIERS

FEATURES - - - - - - - - - - - Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 600 Watts Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low incremental surge resistance 600W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.01% Excellent clamping capability Fast response time: typically less than 1.0ps from 0 Volts to V (BR) for unidirectional and 5.0ns for bidirectional types For devices with V (BR) ≥10V, ID are typically ID less than 1.0μA High temperature soldering guaranteed: 250℃/10 seconds at terminals Cass: JEDEC DO-214AA,molded plastic body over passivated junction Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color bands denotes positive end (cathode) except bidirectional Mounting position: any Weight: 0.003 ounces, 0.093 gram DO-214AA(SMB) Dimensions in inches and (millimeters) MECHANICAL DATA - - - - - DEVICES FOR BIDRECTIONAL APPLICATIONS - For bidirectional use C or CA suffix for types SMB-5.0 thru SMB-170 (e.g. SMBG5.0C,SMBJ170CA) .Electrical Characteristics apply in both directions. Ratings at 25℃ ambient temperature unless otherwise specified Ratings Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,2,FIG.1) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Note2,3) - unidirectional only Maximum instantaneous forward voltage at 50A (NOTE 3,4) unidirectional only (NOTE 3) Operating Junction and Storage Temperature Range .. - MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Symbols PPPM IPPM IFSM VF TJ, TSTG Value Minimum 600 See Table 1 100.0 SEE NOTE 4 50 to +150 Unit Watts Amps Amps Volts ℃ Notes: 1. 2. 3. Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2 Mounted on...