SM16 Datasheet Text
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SM6.8 THRU SM200CA
Breakdown Voltage Peak Pulse Power
6.8 to 200 Volts 400 Watts
Features
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O
- For surface mounted applications
- Glass passivated junction
- Low inductance surge resistance
- Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types
- 400W peak pulse capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01%
- For devices with V(BR) ≥10V, ID are typically less than 1.0μA
- High temperature soldering guaranteed: 250℃/10 seconds at terminals
DO-213AB Dimensions in inches and (millimeters)
MECHANICAL DATA
- Cass: JEDEC DO-213AB,molded plastic body over passivated junction
- Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
- Polarity: Blue bands denotes positive end (cathode) for unidirectional and yellow band in the
Middle for bidirectional types
- Mounting position: any
- Weight: 0.116 ounces, 0.0064 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
- For bidirectional applications use suffix letters C or CA for types SM6.8 thru SM200A (e.g. SM6.8C, SM200CA).Electrical Characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
- Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Symbols
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1)
Steady Stage Power Dissipation at TT=75℃(Note2) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load for unidirectional only (JEDEC Method) (Note3) Maximum instantaneous forward voltage at 25A (NOTE 3) for unidirectional only...
