SM7.5 Datasheet | MIC

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SM6.8 THRU SM200CA Breakdown Voltage Peak Pulse Power 6.8 to 200 Volts 400 Watts Features - Plastic package has Underwriters Laboratory Flammability Classification 94V-O - For surface mounted applications - Glass passivated junction - Low inductance surge resistance - Fast response time: typical less than 1.0ps from 0 volts to V(BR) for unidirectional AND 5.0ns for bidirectional types - 400W peak pulse capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% - For devices with V(BR) ≥10V, ID are typically less than 1.0μA - High temperature soldering guaranteed: 250℃/10 seconds at terminals DO-213AB Dimensions in inches and (millimeters) MECHANICAL DATA - Cass: JEDEC DO-213AB,molded plastic body over passivated junction - Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 - Polarity: Blue bands denotes positive end (cathode) for unidirectional and yellow band in the Middle for bidirectional types - Mounting position: any - Weight: 0.116 ounces, 0.0064 gram DEVICES FOR BIDRECTIONAL APPLICATIONS - For bidirectional applications use suffix letters C or CA for types SM6.8 thru SM200A (e.g. SM6.8C, SM200CA).Electrical Characteristics apply in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS - Ratings at 25℃ ambient temperature unless otherwise specified Ratings Symbols Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1) Steady Stage Power Dissipation at TT=75℃(Note2) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load for unidirectional only (JEDEC Method) (Note3) Maximum instantaneous forward voltage at 25A (NOTE 3) for unidirectional...