SMC43 Datasheet | MIC

FEATURES - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 - For surface mounted applications in order to optimize board space - Low profile package - Built-in strain relief - Glass passivated junction - Low inductance - 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01% - Excellent clamping capability - Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types - For devices with V(BR)≥10V, ID are typically less 1.0μA - High temperature soldering guaranteed: 250℃/10 seconds at terminals MECHANICAL DATA DO-214AB(SMC) Dimensions in inches and (millimeters) - Cass: JEDEC DO-214 AB, molded plastic over passivated junction - Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 - Polarity: For uni-direction types the Color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation - Mounting Position: any - Weight: 0.007 ounces, 0.21 gram DEVICES FOR BIDRECTIONAL APPLICATIONS - For bidirectional use suffix C or CA for types SMC-5.0 thru SMC-170 (e.g. SMC5.0C, SMC170CA). Electrical characteristics apply in both in both directions. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS - Ratings at 25℃ ambient temperature unless otherwise specified Ratings Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1.2,FIG.1) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Notes 2,3) - unidirectional only Maximum instantaneous forward voltage at 100A (NOTE3) unidirectional only Operating Junction and Storage Temperature Range Symbols PPPM IPPM IFSM VF TJ, TSTG Value Minimum1500 See Table 1 3.5 50 to +...