Datasheet4U Logo Datasheet4U.com

MIC2788 - Push-Button Reset

General Description

The MIC2788/MIC2789 are low-current, ultra-small, pushbutton reset supervisors with long set-up delays.

The devices feature two manual reset inputs and two reset outputs.

Key Features

  • integrated pull-up resistors on the /MR0 and /MR1 inputs, while the MIC2789 requires external pull-up resistors. The PDY input pin selects between a 2s, 4s or 6s set-up period. Factory-programmed reset timeout periods of 140ms (min. ) and 240ms (min. ) are available. An active-low, open-drain reset output (/RST) and an active-high, push-pull reset output (RSTP) provide flexibility when interfacing to various microcontroll.

📥 Download Datasheet

Datasheet Details

Part number MIC2788
Manufacturer MICREL
File Size 537.58 KB
Description Push-Button Reset
Datasheet download datasheet MIC2788 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC2782 Dual-Input Push Button Reset Micrel Semiconductor
MIC2753 Power Supply Supervisors Micrel Semiconductor
MIC2754 Power Supply Supervisors Micrel Semiconductor
MIC2755 Battery System Supervisor Preliminary Information Micrel Semiconductor
MIC2774 Dual Micro-Power Low Voltage Supervisor Micrel Semiconductor

Other Datasheets by MICREL

Part Number Description
MIC2785 Dual Supply Voltage Monitor
MIC2789 Push-Button Reset
MIC27600 36V / 7A Hyper Speed Control Synchronous DC-DC Buck Regulator
MIC2772 Dual Voltage Supervisor
MIC2004 Fixed Current Limit Power Distribution Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC2788/MIC2789 Push-Button Reset IC General Description The MIC2788/MIC2789 are low-current, ultra-small, pushbutton reset supervisors with long set-up delays. The devices feature two manual reset inputs and two reset outputs. The devices initiate a reset for the reset timeout period when the /MR0 and /MR1 inputs are asserted low for a period longer than the set-up delay. The two manual reset inputs and long set-up period help to avoid unintended system resets. Both manual reset inputs can be tied together if a single push-button reset is desired. The MIC2788 features integrated pull-up resistors on the /MR0 and /MR1 inputs, while the MIC2789 requires external pull-up resistors. The PDY input pin selects between a 2s, 4s or 6s set-up period.