MICROBOT DHT11
the DHT11 sensor and gives a digital output that is proportional to temperature and humidity measured by the sensor. Each DHT11 element is accurately calibrated in the laboratory. The single-wire serial interface makes the integration of this sensor in digital system quick and easy.| Part No. | DHT11 |
|---|---|
| Datasheet | DHT11 Download |
| Manufacturer | MICROBOT |
| Description | Humidity and Temperature Digital Sensor |
| Buy | Stock & Price |
Name: DHT11 Humidity and Temperature Digital Sensor Code: MR003-005.1 This board is a breakout board for Technology used to produce the DHT11 sensor grants high reliability, excellent long-term stability and very fast response time. Calibration coefficient is stored in the internal OTP memory and this value is used by the sensor’s internal signal detecting process. Sensor physical interfacing is realized through a 0.1” pitch 3-pin connector: +5V, GND and DATA. First two pins are power supply and ground and they are used to power the sensor, the third one is the sensor digital output signal. Its small physical size (1.05”x0.7”) and its very light weight (just 0.1oz) make this board an ideal choice to implementing small robots and ambient monitoring systems. CONNECTIONS DATA GND +5V Serial data output Ground Power supply (+5V) Tab.1 – Connections 1 MICROBOT di Prosseda Mirko – Strada Chiesuola 117, 04010 Borgo Carso (LT), Italy web: email: info@microbot.it tel: +39-347-2159275 Free Datasheet Microbot – DHT11 Humidity and Temperature Sensor Fig.
