Datasheet4U Logo Datasheet4U.com

MM3538AL - Linear Charger

Features

  • a built-in load switch with overvoltage detection function and input current limit required for system paths, and built-in power FETs, backflow prevention diodes, and current sensor function required for charging and discharging. The IC comes equipped with an adapter and USB automatic recognition function, and allows the individual settings for charging control voltage and current with I2 C communication. Features (1) ADP/USB detection by using of USB bus D+/D- pin (2) I2Cbus control C.

📥 Download Datasheet

Datasheet Details

Part number MM3538AL
Manufacturer MITSUMI
File Size 1.59 MB
Description Linear Charger
Datasheet download datasheet MM3538AL Datasheet

📁 Similar Datasheet

  • MM30-xxxx - Connectors (JAE)
  • MM3000 - GENERAL PURPOSE TRANSISTOR (Motorola)
  • MM3001 - GENERAL PURPOSE TRANSISTOR (Motorola)
  • MM3002 - GENERAL PURPOSE TRANSISTOR (Motorola)
  • MM3003 - GENERAL PURPOSE TRANSISTOR (Motorola)
  • MM3005 - (MM3005 - MM3010) CMOS Switching Regulator (Mitsumi Electronics)
  • MM3005 - AUDIO TRANSISTOR (Motorola)
  • MM3006 - (MM3005 - MM3010) CMOS Switching Regulator (Mitsumi Electronics)
  • MM3006 - AUDIO TRANSISTOR (Motorola)
  • MM3007 - (MM3005 - MM3010) CMOS Switching Regulator (Mitsumi Electronics)
Other Datasheets by MITSUMI
  • MM3532T - 150mA LDO
  • MM3508A - 2 to 4cell Li-ion/Li-polymer battery Secondary protection
  • MM3508B - 2 to 4cell Li-ion/Li-polymer battery Secondary protection
  • MM3508C - 2 to 4cell Li-ion/Li-polymer battery Secondary protection
  • MM3511 - One-cell li-ion/li-polymer battery protection
  • MM3513 - Voltage Monitor IC
  • MM3526 - 500mA LDO
  • MM3529 - 1A LDO

Full PDF Text Transcription

Click to expand full text
Linear Charger for 1Cell Li-ion Battery with System-path IC MM3538AL Linear Charger for 1Cell Li-ion Battery with System-path IC Monolithic IC MM3538AL Outline This IC is a linear charging control IC with built-in system paths, and includes a chip with system path function and lithium ion/lithium polymer secondary battery charging function. This IC features a built-in load switch with overvoltage detection function and input current limit required for system paths, and built-in power FETs, backflow prevention diodes, and current sensor function required for charging and discharging. The IC comes equipped with an adapter and USB automatic recognition function, and allows the individual settings for charging control voltage and current with I2 C communication.
Published: |